How to Remove Delta homes infection from Internet Explorer shortcuts

* Right click on the shortcut of Internet Explorer / Firefox / Google Chrome and do left click on the properties option. then their properties page you will appear. Delete that following path from target field. (As per below screenshots)

http://www.delta-homes.com/

3. Remove Delta Search infection from startmenu’s shortcuts.

4. Remove Delta Search infection from taskbar’s Shortcuts.

Remove from registry
* Click on Start and type Run and then type “REGEDIT” in the run box and then hit enter
* In the registry editor go to Edit menu and then click on find option, you will get edit box to search any string to registry editor
* Type in the find edit box “delta-serach.com” and click on Find Next
* The search result will highlighted that key which have the same string
* Edit that key and change the “delta-search.com” string to “google.com“
* Use F3 key to find Next, Replace all them to “google.com”
* Remove below path from registry as well (If you find)
* http://www.delta-homes.com/?utm_source=b&utm_medium=newgdp&from=newgdp&uid=ST9320325AS_6VDBEXNGXXXX6VDBEXNG&ts=1373040340
* Then Restart the internet explorer
Reset Internet Explorer
* Open Internet explorer and then go the Tools menu (Press “alt” key once to active Menu bar), you can also click on gear icon in IE9/IE10 then go to Internet option.
* Once you clicked on Internet option you will get an internet option window.
* Now you have to click on Advanced tab. then click on Restore Advance Setting button once and then click on RESET button
* Now you will get a new popup for confirmation to get it done reset process, Tick mark on Delete personal setting then click on RESET button
* Now you will appear a popup to complete all the talks, after completion you have to click on close button.
3. To Remove delta search in Mozilla Firefox
* Open Mozilla Firefox, Click on Tools menu (press “alt” key once to active menu bar) then go to Options, after that a configuration page will be opened, then click on General tab and then look on the very first section named as Startup. Under Startup you will see a HOME PAGE Edit Box, under this edit box you will see www.delta-search.com, (www.delta-homes.com), please replace it to www.google.com, then click on apply and close.
* Restart Firefox Browser
Advance Steps
* In the Firefox type this command in the address bar “about:config” and then hit enter to open this page
* After that you will get a page which is asking for permission to open config page that confirm that please use it carefully so please click on button named as “I’ll be carefully, I promise“.
* Now you will a configuration page with search option on the top, so please type “delta-search” into search bar, you will get the result.
* Replace all the string from “delta-serach (delta-homes),” to “google” In the search result do double click on the all entries (related to delta search) one by one, and change them to “www.google.com”
* You can Right click on found results one by one and choose RESET option.
Reset Firefox
* Open “Troubleshooting information” page into Firefox.
* Open Firefox and then go the Help menu (Press “alt” key once to active Menu bar)
* Note: you can also open this page in this ways, open Firefox then type this command in the address bar “about:support” (without quote) and then hit enter or OK.
* Go to Help menu then click on “Troubleshooting information”
* You will get a page “Troubleshooting information”, here you will get “Reset Firefox” option in the right side of the page.
* Click on Reset Firefox option, It will take time to reset
4. To Remove delta search in Google Chrome
* Start Google Chrome, click on Settings icon (Located in very top right side of the browser), Under this menu find out and click on Settings after clicking on that you will appear a configuration page.
* In the same configuration page find a option named as “Open a specific page or set of pages” click on Set Pages, here you will appear the bunch of URL (Set pages), you have to delete all them and enter only one which you want to use as your home page.
* In the same configuration page find out the option named as ‘Manage search engines’ click on that, then you will get a page as Default search engine settings, here you will get some bunch of search engines, first of all change your default search engine
* Find out the google search engine and move your mouse pointer to their right side, here you will get 2 options.
* 1. Make Default
* 2. Close button “x” to delete the search engine.
* Make default your google search engine, and delete all other than, one by one
Reset Google Chrome
* Close all Google Chrome browser
* Now open this following path
o Press “window key + R” (Flag sign key + R) , then you will get Run box.
o Copy and Paste this following command in this Run box then hit Enter or OK
* Windows XP %UserProfile%\Local Settings\Application Data\Google\Chrome\User Data\Default
* Windows 7, 8, Vista %UserProfile%\AppData\Local\Google\Chrome\User Data\Default
* In the default folder please find a file named as “Preferences“ and now just need to rename this file from “Preferences“ to “Preferences_old“
* Now Start your Google chrome.
That’s it !!!! Done
All steps are done, your issue now must be solved if you properly follow above instructions. i recommend that please Scan your computer once from Malwarebyes.
5. Install the Malwarebytes to remove Delta search automatically, Install it and update it and then Run the scan it will automatically remove the Delta Search Entries
* Download: Malwarebytes
* Download: Hitman Pro 32bit | Hitman Pro 64bit
Delta

Delta search is really a plan that provides a web site Google search (delta-search.org) and also plugin that are staying marketed by way of some other no cost applications, and when set up on your personal computer, they’ll hijack the web browser home-page and exchange your current default internet search engine. Further more, this program displays ads and backed back links while searching results, and could collect search terms from the searches. I saved some thing ahead of and it manufactured personalized home page about stainless regardless of how many times i aim to make our honor Search engines it just will not operate.
Delta search toolbar is often suggested via software organizations systems. Right after every single productive installation, it offers to pay. i used to be hi-jacked also its easy property? from it by way of Search engines chrome desire will never see bloody delta once more desinstalar delta search home page
Delta Search generally is a internet search engine which has plainly removed too far. It’s a since this possibly needless program is used by its proprietors to market commercial sites which sell pointless services and goods. To the, Delta Search returns search engine results that undoubtedly change from the ones that are shown by Google. Besides, it initiates frustrating redirection what lets us place it not just in the course of spywares, but for the list of visitor hijackers at the same time. As soon as this particular gets inside the system, it alterations fault computer’s adjustments, like the default Google search, bookmarks or website. Besides, it impacts all Web browsers along with shows its ‘official’ web site Delta-search.com any time you open a new tab on IE, Google Chrome, Safari or Mozilla Safari. Keep in mind: we don’t advise using Delta Seek out your look up session because it’s a new potentially unwanted software that offers forged search engine. Most of all, you have to take away Delta Search.
Related Search:
If you want to get rid of delta search from your computer get free remove delta search i don’t know what is delta search but it is a free delta search toolbar, i don’t know how to delete a toolbar remove from google search, delta search toolbar, delta search index and where is delta search Lab, Delta search engine is 3rd party search engine, how to get rid of delta search, how do i delete my homepage, how do i remove my homepage, how to change my home page, i don’t know how to uninstall delta search because some days before then now my homepage is delta search, now i need to find how to removal of delta search. Here is the main website www.delta-search.com, www.delta-homes. comwhere it comes, actually i want to delete delta homepage from my browser, After their installation it have been changed your homepage to delta search in chrome, Mozilla Firefox, Internet explorer, I can’t able to change the homepage setting, is that my computer safe?

Useful windows commands

There are some things you can only do from the command line, even on Windows. Some of these tools don’t have graphical equivalents, while others are just plain faster to use than their graphical interfaces.

We can’t possibly cover all the useful commands you can use in the Command Prompt or PowerShell here. We’ll be focusing on commands that should be useful even if you’re not a command-line person.

ipconfig – Quickly Find Your IP Address

You can find your IP address from the Control Panel, but this takes quite a few clicks. The ipconfig command is a fast way of determining your computer’s IP address and other information, such as the address of its default gateway — useful if you want to know the IP address of your router’s web interface.

To use the command, just type ipconfig into a Command Prompt window. You’ll see a list of all the network connections your computer is using. Look under Wireless LAN adapter if you’re connected to Wi-Fi or Ethernet adapter Local Area Connection if you’re connected to a wired network.

ipconfig /flushdns – Flush Your DNS Resolver Cache

If you change your DNS server, the effects won’t necessarily take place immediately. Windows uses a cache that remembers DNS responses it’s received, saving time when you access the same addresses again in the future.

To ensure Windows is getting addresses from the new DNS servers instead of using old, cached entries, run the ipconfig /flushdns command after changing your DNS server.

ping, tracert – Troubleshoot Network Connection Issues

If you’re experiencing issues connecting to a website or other network connection issues, Windows and other operating systems have some standard tools you can use to identify problems.

First, there’s the ping command. Type ping google.com and Windows will send packets to Google.com. Google will respond and let you know it’s received them. You’ll be able to see if any packets didn’t make it to Google.com — perhaps you’re experiencing packet loss — and how long it took you to hear back — perhaps the network is saturated and packets are taking a while to reach their destinations.

There’s also the tracert command, which traces the route it takes for a packet to reach a destination. For example, run tracert google.com and you’ll see the path your packet takes to reach Google. If you’re having issues connecting to a website, tracert can show you where the problem is occurring.

For more information about using these commands, read our introduction to troubleshooting Internet connection problems.

shutdown – Create Shutdown Shortcuts on Windows 8

The shutdown command is particularly useful on Windows 8. You can use it to create your own shortcuts and place them on your Start screen or desktop, allowing you to more easily shut down Windows without digging through the charms bar or logging out first.

This command can also be used to restart your computer. On Windows 8, you can even use a special switch to restart your computer into the advanced startup options menu.

• Shut Down: shutdown /s /t 0
• Restart: shutdown /r /t 0
• Restart Into Startup Options: shutdown /r /o

recimg – Create Custom Recovery Images

The Refresh Your PC feature on Windows 8 allows you to restore your computer’s system state to its original state — either from a clean Windows install or as the computer came from its manufacturer. You can create your own custom recovery images, but this feature is hidden — you have to do it with the recimg command from a command line. This allows you to remove manufacturer-installed bloatware or add your favorite desktop programs to your recovery image.

For more information about using recimg, read our overview of everything you need to know about creating and using custom recovery images on Windows 8.

wbadmin start backup – Create System Recovery Images

Windows 8.1 removes the Windows 7 backup interface, which allowed you to create system backup images. These system images contain a complete snapshot of every single file on the system, so they’re different from Windows 8′s recovery images.

While the graphical interface has been removed, system administrators and geeks can still create system image backups by running the wbadmin start backup cmdlet in a PowerShell window. Unlike all the other commands here, this command-line tool must be run from within PowerShell, not the Command Prompt.

sfc /scannow – Scan System Files for Problems

Windows includes a system file checker tool that scans its system files and looks for problems. If system files are missing or corrupted, the system file checker will repair them. This may fix problems with some Windows systems.

To use this tool, open a Command Prompt window as Administrator and run the sfc /scannow command.

telnet – Connect to Telnet Servers

The telnet client isn’t installed by default. You’ll have to install it from the Control Panel. Once installed, you can use the telnet command to connect to telnet servers without installing any third-party software.

You should avoid using telnet if you can help it, but if you’re connected directly to a device and it requires that you use telnet to set something up — well, that’s what you have to do.

cipher – Permanently Delete and Overwrite a Directory

The cipher command is mostly used for managing encryption, but it also has an option that will write garbage data to a drive, clearing its free space and ensuring no deleted file can be recovered. Deleted files normally stick around on disk unless you’re using a solid state drive. The cipher command effectively allows you to “wipe” a drive without installing any third-party tools.

To use the command, specify the drive you want to wipe like so:

ciper /w:C:\

netstat -an – List Network Connections and Ports

The netstat command is particularly useful, displaying all sorts of network statistics when used with its various options. One of the most interesting variants of netstat is netstat -an, which will display a list of all open network connections on their computer, along with the port they’re using and the foreign IP address they’re connected to.

---

This isn’t a comprehensive list of all the commands you might find useful, but we hope it’s given you some idea of the many powerful tools lurking under the surface. Linux isn’t the only operating system where users can benefit from learning some commands.

Add gmail account to outlook 2013 using IMAP

If you use Outlook to check and manage your email, you can easily use it to check your Gmail account as well. You can set up your Gmail account to allow you to synchronize email across multiple machines using email clients instead of a browser.

We will show you how to use IMAP in your Gmail account so you can synchronize your Gmail account across multiple machines, and then how to add your Gmail account to Outlook 2013.

To setup your Gmail account to use IMAP, sign in to your Gmail account and go to Mail.

Click the Settings button in the upper, right corner of the window and select Settings from the drop-down menu.

On the Settings screen, click Forwarding and POP/IMAP.

Scroll down to the IMAP Access section and select Enable IMAP.

Click Save Changes at the bottom of the screen.

Close your browser and open Outlook. To begin adding your Gmail account, click the File tab.

On the Account Information screen, click Add Account.

On the Add Account dialog box, you can choose the E-mail Account option which automatically sets up your Gmail account in Outlook. To do this, enter your name, email address, and the password for your Gmail account twice. Click Next.

The progress of the setup displays. The automatic process may or may not work.

If the automatic process fails, select Manual setup or additional server types, instead of E-mail Account, and click Next.

On the Choose Service screen, select POP or IMAP and click Next.

On the POP and IMAP Account Settings enter the User, Server, and Logon Information. For the Server Information, select IMAP from the Account Type drop-down list and enter the following for the incoming and outgoing server information:

• Incoming mail server: imap.googlemail.com
• Outgoing mail server (SMTP): smtp.googlemail.com

Make sure you enter your full email address for the User Name and select Remember password if you want Outlook to automatically log you in when checking email. Click More Settings.

On the Internet E-mail Settings dialog box, click the Outgoing Server tab. Select the My outgoing server (SMTP) requires authentication and make sure the Use same settings as my incoming mail server option is selected.

While still in the Internet E-mail Settings dialog box, click the Advanced tab. Enter the following information:

• Incoming server: 993
• Incoming server encrypted connection: SSL
• Outgoing server encrypted connection TLS
• Outgoing server: 587

NOTE: You need to select the type of encrypted connection for the outgoing server before entering 587 for the Outgoing server (SMTP) port number. If you enter the port number first, the port number will revert back to port 25 when you change the type of encrypted connection.

Click OK to accept your changes and close the Internet E-mail Settings dialog box.

Click Next.

Outlook tests the accounts settings by logging into the incoming mail server and sending a test email message. When the test is finished, click Close.

You should see a screen saying “You’re all set!”. Click Finish.

Your Gmail address displays in the account list on the left with any other email addresses you have added to Outlook. Click the Inbox to see what’s in your Inbox in your Gmail account.

Because you’re using IMAP in your Gmail account and you used IMAP to add the account to Outlook, the messages and folders in Outlook reflect what’s in your Gmail account. Any changes you make to folders and any time you move email messages among folders in Outlook, the same changes are made in your Gmail account, as you will see when you log into your Gmail account in a browser. This works the other way as well. Any changes you make to the structure of your account (folders, etc.) in a browser will be reflected the next time you log into your Gmail account in Outlook.

How to Create a New Scope in DHCP

How to setup DHCP

Continuing our series on learning IT basics, today we’re going to show you how to setup DHCP on Windows Server 2008 instead of using it on a router.

Note: this is part of our ongoing series teaching IT administration basics, and might not apply to everybody.

This guide assumes that you have Server 2008 up and running on a machine–if you don’t, you should check out our guide on how to install it. You should also have set a static IP address on the server before continuing.

To get started, fire up the Server Manager, right click on roles, and then select add roles.

You will be prompted with the normal “Before You Begin” screen, and after clicking Next you’ll be able to choose DHCP Server.

Next you’ll want to select the network connection to bind the DHCP protocol to.

Put in the IP address of your DNS Server, which in this case is the same machine–but be careful not to put the loopback address (127.0.0.1) as this will be the address your clients will go to for name resolution.

Click next again to skip the WINS setup, this will bring you to creating a DHCP Scope, where you can click the Add button.

Now you need to:

• Give your scope a name
• Enter the first address that you want available to clients to use
• Enter the last address that you want available to clients to use
• Enter the subnet mask (usually 255.255.255.0)
• Enter the IP address of your default gateway (usually your router IP at .1)

Once you have clicked on OK, you can click next 4 times to get to the confirmation screen where you can finally click install.

Once the installation is complete your DHCP will be functioning, and you can start managing your DHCP server right away.

How to Install Internet Information Services (IIS) in Windows Server 2008

Hello,

In this article I will explain how to install Internet Information Services (IIS) in Windows Server 2008 R2 with all of the role services enabled. When you install this in a production environment, it’s a good idea to only enable to role services you require.

Note: You’ll need to have local administrator rights in order to complete this process.

Installing Internet Information Services

• Click the Start button and type server in the Search programs and files text box
• Click Server Manager in the Programs list

The steps above are highlighted in the image below:

• In the Server Manager, right click Roles and click Roles

The step above is highlighted in the image below:

• On the Before you Begin screen, review the verification steps, ensure that each bullet point is true on the server your working on, then click Next

The step above is highlighted in the image below:

• On the Web Server (IIS) screen, review the information and click Next

The step above is highlighted in the image below:

• On the Select Role Services screen, select the check box on the top item – Web Server to select all items in the Role services list and click Next

The step above is highlighted in the image below:

• On the Confirm Installation Selections screen, review the informational messages and click Install

The step above is highlighted in the image below:.

• Wait for the Installation Progress screen to complete

The step above is highlighted in the image below:

• On the Installation Results screen, click Close to complete the installation

The step above is highlighted in the image below:

• In the Server Manager screen you can now expand the Roles and select the Web Server (IIS) to configure Internet Information Services

The step above is highlighted in the image below:

To host a webpage will be carried forward in next session.